Telephone:
Contact us:
alsancak@mayasanteizmir.com
These creases can deepen with time as a result of aging, sun damage, heredity, and the recurrent muscle movements required to make various facial emotions. Dermal fillers can be used to increase volume there, making the wrinkles less noticeable and restoring a more youthful contour to the face.
Types of Fillers: Hyaluronic acid (HA) fillers, a material found naturally in the skin, are the most often utilized fillers for the nasolabial region. Juvederm, Restylane, and Teosyal are nasolabial filling some of the most well-known brands. You can also utilize fillers like Radiesse (calcium hydroxylapatite) and Sculptra (poly-L-lactic acid) here.
The procedure itself takes very little time; usually less than an hour. Using a small needle or cannula, the filler is injected into the nasolabial folds. Lidocaine, a topical anesthetic, is used in several fillers to reduce any potential pain. A local anesthetic cream can be used beforehand if necessary.
Results can last anywhere from six months to two years, depending on the specific filler utilized and the patient.
Injection sites ma experience temporary swelling, redness, and bruising, although these symptoms often subside within a week. Swelling can be reduced by applying a cold compress, and it is advised that you rest for at least 24 hours after surgery and avoid alcohol and vigorous activities.
Nasolabial filling’s benefits include a more youthful and rested look by diminishing the appearance of wrinkles around the nose and mouth when performed skillfully and without making the face look “overdone.”
As with any medical operation, nasolabial filling has the possibility of side effects such as bruising, edema, asymmetry, lumpiness, allergic reactions, and, in extremely rare situations, infections or vascular problems.
If problems arise or the patient is dissatisfied with the results, HA fillers can be destroyed with an enzyme called hyaluronidase, making them reversible.
Juvederm, Restylane, and Teosyal are some of the most well-known brands.
Depends on the substance and the person, but usually lasts between six and eighteen months. The longevity of some of the newest HA fillers may reach 24 months.
Collagen formation can be prompted by this filler, which is denser than hyaluronic acid fillers.
The effects may continue for up to two years.
Rather than just adding volume to the skin, Sculptra actually encourages the body to create its own collagen.
The effects may continue for at least two years. In most cases, however, the best results come from a series of treatments spaced out over a few months.
A more permanent option is to use one’s own fat to fill up the nasolabial folds, however not all of the transplanted fat cells will survive. Loss of volume over time may necessitate further therapy.
In terms of metabolism, some people break down fillers more quickly than others.
Movements of the face, such as the nasolabial folds when smiling or talking, may hasten the breakdown of fillers placed there.
Quantity and Method: Both the injector’s skill and the volume of filler used affect how long the effects last.
Although the effects of fillers are long-lasting, they are not permanent. If you want your results to last, you’ll probably need to schedule regular maintenance appointments.
Most patients report feeling a mild to severe pinching or stinging sensation after filler injections.
Many of today’s dermal fillers already include the local anesthetic lidocaine in their formulations. The lidocaine in the filler starts to numb the region right after injection, which can make future injections more bearable.
A numbing cream or gel can be administered to the nasolabial region before to the injections to reduce any discomfort.
Applying a cold compress or ice pack to the injection site before to the operation might numb the skin and make the injections seem less painful.
Some doctors prefer to use a cannula with a soft tip for injecting fillers, rather than a needle. A cannula is a slender tube that is bendable and has a rounded end. Although a tiny needle is still needed to make an incision, the cannula itself can cover more ground with fewer punctures, which may be less painful and cause less bruising. Cannulas are preferred by certain people because they are less invasive.
Tenderness, swelling, and a sense of tightness are all potential side effects of the injections after treatment. This is common and should pass within a few days.
Talk to your doctor about your concerns regarding pain management before the surgery begins. They could suggest over-the-counter pain medicines (but not NSAIDs like aspirin, which can exacerbate bruising) or specific pain management strategies.
Remember that pain is relative; what may be just moderately bothersome to one person may be excruciatingly so to another. People have different pain thresholds.
Excessive use of filler can provide an artificial look. To obtain a natural and rejuvenated appearance, an expert injector will know just how much to use.
Different fillers, depending on their consistency and how they integrate with the skin, are more suited to the nasolabial region than others. Professional medical personnel know which treatment option will be most effective for each patient.
Method: It is essential to use correct injection method. The filler should be applied uniformly, and rubbing the injection site afterward might aid in this regard.
Nasolabial folds vary in depth and prominence from person to person due to individual differences in facial structure. The most realistic results may be achieved with a tailored strategy that takes into consideration the unique characteristics of each person’s face.
To ensure the filler sets effectively and appears natural, it is important to follow the post-treatment advice, such as avoiding heavy face manipulation and keeping out of harsh light or heat for a day or two.
In the event tat the results of employing hyaluronic acid fillers don’t seem as natural as anticipated, the filler can be partially or completely dissolved with an enzyme called hyaluronidase.
The importance of the injector’s skill cannot be overstated. The skill and experience of the injector are crucial factors in producing realistic enhancements. To get the best results from fillers, you should work with a board-certified dermatologist, plastic surgeon, or licensed cosmetic practitioner.
Initial Pain: You may experience swelling, pain, or tightness in the treated region immediately following the operation. You can still grin, but the sensation may be unfamiliar or uneasy. This feeling is normal and will fade as the swelling subsides and the filler sets in.
When done correctly, nasolabial fillers should not limit your ability to smile or make other facial expressions. A trained injector can put the filler so that it harmoniously adapts to your face movements.
Use caution around the treated region for at least two days after treatment. You can laugh, grin, and make other emotions, but avoid putting too much pressure on the affected region.
The filler may migrate somewhat from its original place in the first few hours following the treatment due to excessive facial movement. However, if you go to a respected injector, you won’t have to worry about this too much.
Immediately following treatment, your smile may look a little different due to swelling or redness. Your grin will regain its natural appearance, with the nasolabial folds increased or relaxed as the adverse effects wear off.
The additional volume or smoothed lines in the nasolabial area may take some getting accustomed to, as is the case with any change in appearance. You may experience a temporary difference in how your smile feels at this period, but this should pass as your body adjusts to the new conditions.
The use of excessive filler can provide an artificial or “overdone” look. The nasolabial fold may seem bloated or out of proportion with the rest of the face.
One side of the face may look different from the other if the filler is applied unevenly.
Subcutaneous lumps or bumps can develop from poor injection technique or from not rubbing the region after receiving an injection.
There is a chance of infection with every injection. Contamination of the filler or the injection equipment might cause this, as can improper skin preparation before the injection.
Bruising and swelling are frequent side effects of filler injections, and while they are usually mild, they can sometimes be more severe or persist for longer than anticipated.
There is a small but real risk that some patients will have an allergic response to either the filler itself or the lidocaine that is frequently used in conjunction with it.
Inadvertent injection of filler into a blood artery might cause a clot to form and a loss of blood flow to the region. Tissue death (necrosis) or other catastrophic outcomes may result from this infrequent but dangerous condition.
Unwanted side effects might occur if the filler moves or migrates away from the injection site.
Some people may be dissatisfied with the cosmetic outcomes of their therapy even if there are no issues.
Make sure your injector has the proper education, expertise, and certification to safely and effectively administer dermal fillers.
Talk to your doctor or aesthetician about your aesthetic objectives, any worries you have, and any health issues or drugs that may interfere with the surgery before it begins.
Adhering to post-treatment instructions can help lessen the chance of problems, so do as instructed.
Nasolabial filler is used mostly to treat the folds or wrinkles that start just below the nose and extend down to the corners of the mouth. The look of these wrinkles can be improved by adding volume to the region in question.
A slight lifting impact on the cheekbones and lower face may result from working on the nasolabial folds.
The addition of volume to the nasolabial region has the added benefit of providing structural support to the facial tissues. This can give the region around your nose and mouth a modest lift, and it may even help get rid of those pesky nasolabial folds and marionette lines that run from your mouth’s corners all the way down to your chin.
The addition of volume to one part of the face can alter the appearance of other places, thus many skilled injectors use a holistic approach when using facial fillers. Nasolabial folds can be lifted and made to seem better, for instance, by focusing on the midface or cheeks.
While nasolabial fillers can provide a little lift to the cheeks, direct cheek fillers should be used if raising the cheeks or restoring volume to the midface is the primary aim. To restore or augment midface volume, fillers are injected deeper into the cheeks and even up onto the cheekbone.
Fillers are used to “fill in” or supplement regions that have lost volume. Nasolabial folds can be softened and lifted with the use of fillers, which are injected into or around the creases.
Nasolabial creases are often treated with hyaluronic acid fillers such as Juvederm, Restylane, and Teosyal. The calcium hydroxylapatite filler Radiesse, as well as the poly-L-lactic acid filler Sculptra, are also viable alternatives.
Fillers can have a lifespan of six months to two years or more, however this varies widely from product to product and person to person.
The end result is that they can make nasolabial folds less noticeable and add instant volume.
Botox is effective because it relaxes muscles, which prevents them from creasing. It is most commonly used to treat dynamic wrinkles, or lines that form as a result of repeated facial expressions.
Normal Botox Targets: Frown lines between the brows (glabellar lines), horizontal forehead lines, and crow’s feet around the eyes are the most common areas of the face treated with Botox.
Botox’s effects might last anywhere from three to six months, depending on the patient and the targeted location.
Apply to the Nasolabial Folds: Nasolabial folds are not routinely treated initially with Botox. However, if the dynamic muscle activity is a major contributor to the appearance of the folds, the doctor may employ a tiny quantity of Botox to calm the targeted muscles in addition to the fillers.
Dermal fillers are the superior option for treating nasolabial folds in the vast majority of patients. They provide you the oomph and boost you need to tackle the issue head-on.
Although Botox may be considered as a secondary or supplemental treatment for nasolabial folds, it is not the first line of defense.
In my clinic, I work extensively in the field of medical facial aesthetics and anti-aging. In our studies, toxin applications (aesthetic purposes, hyperhidrosis treatment, masseteral-bruxism, migraine treatments), dermal fillers, dynamic thread suspension and thread face lift treatments, skin blemishes, acne and acne scars, photoaging and chemical peeling treatments are performed.
